Metrohm Logical Inline Dilution provides for automatic dilution of the sample depending on the predefined concentration limits. Even the dilution factor is determined automatically making sure that results lie always within the calibration range and thus are correct.
Metrohm intelligent Partial Loop Injection (MiPT) automatically adjusts the injection volume to the concentration of the sample. This technique, too, makes sure that the results are always within the calibration range.
Metrohm Inline Extraction transfers water-soluble components form a non-polar organic phase into an aqueous phase for subsequent injection (after Inline Dialysis).
Metrohm Inline Matrix Elimination enables the separation of ionic analytes from the uncharged matrix without the use of sample preparation cartridges (SPE).
Metrohm Inline Preconcentration uses a preconcentration column and is ideally suited for trace analysis down to the ng/L concentration range.
Metrohm Inline Calibration allows to calibrate any standard concentration in the ppt range by using a single standard solution at the µg/L level. This enables accurate and reliable measurements down to the single-digit ng/L range.
Metrohm Inline Neutralization adjusts the pH of samples in order to prevent interferences with the analysis of anions. When combined with Inline Preconcentration, Inline Neutralization makes trace anion analysis possible.
> Learn more about Metrohm Inline Sample Preperation for ion chromatography